How to build a telescope at home? - build a telescope
I would like to build a telescope at home with minimal equipment and technical details. So how come?
Tuesday, February 2, 2010
Build A Telescope How To Build A Telescope At Home?
Copyright 2009
Stiletto ball wedding. Powered by Blogger
Blogger Templates created by Deluxe Templates
Wordpress by Wpthemescreator
Blogger Templates created by Deluxe Templates
Wordpress by Wpthemescreator
1 comment:
Simply put, a telescope must be at home, the following conditions:
1. Two magnifying glasses - about 1 to 1.5 cm (2,5-3 cm) diameter
2. A paper roll - roll of paper towel or wrapping paper and roll band
3. Scissors
4. A rule of a meter or measuring tape
5. Printed
To mount the telescope, you proceed as follows:
Get two magnifying glasses and a sheet of paper.
Hold a magnifying glass (the largest), between you and the paper. The printed image is blurry.
Place the second magnifying glass between the eye and the lens first.
Move the second glass forward or backward until the pressure is checked. You will notice that the pressure is greater and on the head.
Ask someone, the distance between the two lenses and then note the distance.
Cut a slit in the cardboard tube apart near the front opening about an inch (2.5 cm). Do not cut all the way through the tube. The slot should be able to hold large magnifying glass.
Cut a second slot in the tube the same distance from the first slot as a friend said. This is going is the second magnifier.
Place both lenses in their homes (added On the front, small rear) and on tape
Allow about 0.5 to 1 inch (1 to 2 cm) cut the pipe behind the little magnifying glass and excess tube remaining.
Check it works by the printed page. You have to play, attached only to the exact distance between the two glasses, get the picture, an area of development.
Post a Comment